ABB ACS850-04 - Assistants

30 The ACS850 control panel
 Assistants
Assistants are routines that guide you through the essential parameter settings
related to a specific task, for example application macro selection, entering the motor
data, or reference selection.
In the Assistants mode, you can:
• use assistants to guide you through the specification of a set of basic parameters
• start, stop, change the direction and switch between local and remote control.
How to use an assistant
The table below shows how assistants are invoked. The Motor Set-up Assistant is
used here as an example.
Step Action Display
1. Go to the Main menu by pressing if you are in the
Output mode.
Otherwise press repeatedly until you get to the
Main menu.
2. Go to the Assistants mode by selecting ASSISTANTS on
the menu with keys and , and pressing
.
3. The Motor Set-up assistant under Firmware assistants is
used as an example.
Select Firmware assistants with keys and ,
and press .
4. Select Motor Set-up with keys and , and
press .
5. Select the appropriate motor type with keys and
.
MENU
EXIT
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT ENTER
00:00
MAIN MENU 1LOC
ENTER
Firmware assistants
Application assistant
EXIT
SEL
00:00
ASSISTANTS 1
LOC
SEL
Select assistant
Application Macro
Motor Set-up
EXIT
OK
00:00
CHOICE
LOC
OK
9904 Motor type
PAR EDIT
AM
EXIT SAVE00:00
[0]
LOC
9904 Motor type
PAR EDIT
PMSM
EXIT SAVE00:00
[1]
LOC