40 The ACS850 control panel
Parameter errors
If you try to backup and restore parameters between different firmware versions, the
panel shows you the following parameter error information:
Downloading continues, drive is being restarted.
The display shows the transfer status as a percentage of
completion.
Downloading finishes.
Step Action Display
1. Restore operation starts normally.
2. Firmware version is checked.
You can see on the panel that the firmware versions are
not the same.
Scroll the text with keys and .
To continue, press . Press to stop the
operation.
Step Action Display
Restarting drive
PAR BACKUPLOC
00:00
PAR BACKUPLOC
50 %
Restoring/downloading
all parameters
Finishing restore
operation
PAR BACKUPLOC
Initializing param.
restore operation
PAR BACKUP
LOC
00:00
FIRMWARE VERSION
UIFI, 1100, 0,
UIFI, 1010, 0,
OK
PRODUCT VARIANT
CANCEL CONT
VER CHECKLOC
1
00:00
FIRMWARE VERSION
PRODUCT VARIANT
3
3
OK
CANCEL CONT
VER CHECKLOC
2
00:00
To Next Page
Loading...
