ABB ACS850-04 - Page 42

42 The ACS850 control panel
Trying to restore a user set between different firmware versions
If you try to backup and restore a user set between different firmware versions, the
panel shows you the following alarm information:
5. You can edit parameters by pressing when EDIT
command is visible. Parameter 60.05 Pos unit is used as
an example.
Edit the parameter as shown in section Parameters on
page 23.
6. Press to save the new value.
Press to return to the list of erroneous parameters.
7. The parameter value you chose is visible under the
parameter name.
Press when you have finished editing the
parameters.
Step Action Display
1. Restore operation starts normally.
2. Version check is also OK.
You can see on the panel that the firmware versions are
not the same.
You can scroll the text with keys and .
Step Action Display
EDIT
6005 POS UNIT
PAR EDIT
Revolution
CANCEL SAVE00:00
[0]
LOC
SAVE
CANCEL
6005 POS UNIT
PAR EDIT
Degree
CANCEL SAVE00:00
[1]
LOC
READY
6005*POS UNIT
1
?
VALUE MISSING
6008*POS2 INT SCALE
READY EDIT
PAR ERRORSLOC
1
00:00
Initializing param.
restore operation
PAR BACKUP
LOC
00:00
FIRMWARE VERSION
UIFI, 1100, 0,
UMFI, 1010, 0,
OK
PRODUCT VARIANT
CANCEL CONT
VER CHECKLOC
1
00:00
FIRMWARE VERSION
PRODUCT VARIANT
3
3
OK
CANCEL CONT
VER CHECKLOC
2
00:00