ABB ACS880-01-061A-3+N5350 - Page 100

Startup Assistant & Parameters 12-213AXD50000011888
Table 12-4 Level 1 Parameter Block Definitions
Block Title
Parameter (Number)
Selection (Value)
Descriptions
WARNINGS
AND FAULTS
(Continued)
5TH LATEST WARNING
(04.20)
Default: Read Only
Range: 0000h - FFFFh
Code of the 5th stored (non-active) warning.
EVENT WORD (04.40) Default: Read Only
Range: 0000h - FFFFh
User-dened event word. This word collects the status of the events
(warnings, faults or pure events) selected by parameters 04.41 to
04.72.
For each event, an auxiliary code can optionally be specied for
ltering. This parameter is read-only.
Bit Name Description
0 User bit 0 1 = Event selected by parameters 04.41 (and
04.42) is active
1 User bit 1 1 = Event selected by parameters 04.43 (and
04.44) is active
--- --- ---
15 User bit 15 1 = Event selected by parameters 04.71 (and
04.72) is active
EVENT WORD 1 BIT 0 CODE
(04.41)
Default: 0000h
Range: 0000h - FFFFh
Code of event. Selects the hexadecimal code of an event (warning,
fault or pure event) whose status is shown as bit 0 of 04.40 Event word
1. The event codes are listed in chapter Fault tracing.
EVENT WORD 1 BIT 0 AUX
CODE (04.42)
Default: 0000 0000h
Range: 0000 0000h - FFFF FFFFh
Code of warning, fault or pure event. Species an auxiliary code for
the event selected by the previous parameter. The selected event is
indicated by the event word only if its auxiliary code matches the value
of this parameter.
With a value of 0000 0000h, the event word will indicate the event
regardless of the auxiliary code.
EVENT WORD 1 BIT 1 CODE
(04.43)
Default: 0000h
Range: 0000h - FFFFh
Code of event. Selects the hexadecimal code of an event (warning,
fault or pure event) whose status is shown as bit 1 of 04.40 Event word
1. The event codes are listed in chapter Fault tracing.
EVENT WORD 1 BIT 1 AUX
CODE (04.44)
Default: 0000 0000h
Range: 0000 0000h - FFFF FFFFh
Code of warning, fault or pure event. Species an auxiliary code for
the event selected by the previous parameter. The selected event is
indicated by the event word only if its auxiliary code matches the value
of this parameter.
With a value of 0000 0000h, the event word will indicate the event
regardless of the auxiliary code.
EVENT WORD 1 BIT 2 CODE
(04.45)
Default: 0000h
Range: 0000h - FFFFh
Code of event. Selects the hexadecimal code of an event (warning,
fault or pure event) whose status is shown as bit 2 of 04.40 Event word
1. The event codes are listed in chapter Fault tracing.