Example Connection Diagrams 11-13AXD50000011888
Chapter 11
Example Connection Diagrams
The installation of the ACS880+N5350 is ultimately the responsibility of the user to ensure that it is installed in a manner
that will provide a safe and trouble-free system that meets local safety and electrical codes. The information provided in
this section is not intended to specically dictate how the ACS880+N5350 is to be wired or even to imply that all safety
factors have been considered since these may vary from one installation to another. These diagrams are provided so that the
installer may visualize several possible ways the drive can be connected based upon the 2-Wire Operating Mode as well as
the 3-Wire Operating Mode.
The devices external to the ACS880+N5350 and the RPM AC Cooling Tower Motor depicted in the following diagrams are
considered user supplied unless they are ordered as a packaged drive from ABB or as separate line items. Contact your
local ABB representative for support regarding the additional equipment or a packaged drive.
To Next Page
Loading...
Need help?
General