Startup Assistant & Parameters 12-93AXD50000011888
12.1.2 Drive Assistant
Selecting drive assistant (CTDD) will display the cooling tower application assistant. After motor data start-up, the
applicaiton is only capable of 2-wire functionality with no options.
Table 12-2 Drive Assistant
Safety
The start-up may only be carried out by a qualied electrician.
The safety instructions must be followed during the start-up procedure. See the safety instructions on the rst
pages of the appropriate Hardware manual.
Check the installation. See the installation checklist in the appropriate Hardware manual.
Check that the starting of the motor does not cause any danger.
De-couple the driven machine if there is a risk of damage in case of an incorrect direction of rotation.
Power-Up, Date and Time Settings
Power up the drive.
Main Menu Screen appears.
Select “Assistants” from the main menu.
Select assistant to run. Selecting the CTDD Setup
will display the cooling tower application assistant.
00:00 SelectBack
CTDD 0.0 rpmRemote
Assistants
Motor Data & ID Run
CTDD Setup
In the assistant view, press (continue) to enter
the Startup Assistant.
Note: To leave the assistant, press (exit) and go
back to the Home screen.
00:00 ContinueExit
CTDD 0.0 rpmLocal
Drive Set-up
Use arrow keys and soft keys to
navigate the assistant.
To Next Page
Loading...
