8-8 Keypad and Programming 3AXD50000011888
8.4 Basic Operation
This section describes the basic operations and components of the user interface, lists common user tasks and gives short
instructions on how to complete them.
8.4.1 User Interface Overview
The user interface has the following main components:
• The Home view through which you can monitor signals.
• The main Menu through which you can access most functions of the control panel. The Menu functions are described in
detail in chapter Functions in the main Menu.
• The Options menu through which you can set a reference, change the motor direction, select the drive, edit Home view
pages, and see the fault and warning status.
• The Help view which provides advice in many situations.
• Faults and warnings view which appear when the drive or the control panel experiences an error.
8.4.2 Control Panel Navigation
Use the arrow keys and softkeys for navigation. Follow the choices on the screen.
Figure 8-11
Parameters
Assistants
Energy efficiency
Event log
History graphs
Backups
System info
Settings
Home view
Reference
Direction change
Select drive
Edit Home view
Menu
Options
Fault status
8.4.2.1 Navigation Memory
The Assistant control panel has a navigation memory that allows you to backtrack your steps through the user interface with
the arrow keys and . The path you have last accessed remains in the memory for 10 minutes.
• The left arrow key ( ) moves you backwards in the menu structure. If you press repeatedly, you return back to the
Home view.
• The right arrow key ( ) moves you forward in the menu structure. If you press repeatedly, you move forward along
the path in the menu structure you had previously accessed.
To Next Page
Loading...
