Startup Assistant & Parameters 12-233AXD50000011888
Table 12-4 Level 1 Parameter Block Definitions
Block Title
Parameter (Number)
Selection (Value)
Descriptions
WARNINGS
AND FAULTS
(Continued)
EVENT WORD 1 BIT 7 CODE
(04.55)
Default: 0000h
Range: 0000h - FFFFh
Code of event. Selects the hexadecimal code of an event (warning,
fault or pure event) whose status is shown as bit 7 of 04.40 Event word
1. The event codes are listed in chapter Fault tracing.
EVENT WORD 1 BIT 7 AUX
CODE (04.56)
Default: 0000 0000h
Range: 0000 0000h - FFFF FFFFh
Code of warning, fault or pure event. Species an auxiliary code for
the event selected by the previous parameter. The selected event is
indicated by the event word only if its auxiliary code matches the value
of this parameter.
With a value of 0000 0000h, the event word will indicate the event
regardless of the auxiliary code.
EVENT WORD 1 BIT 8 CODE
(04.57)
Default: 0000h
Range: 0000h - FFFFh
Code of event. Selects the hexadecimal code of an event (warning,
fault or pure event) whose status is shown as bit 8 of 04.40 Event word
1. The event codes are listed in chapter Fault tracing.
EVENT WORD 1 BIT 8 AUX
CODE (04.58)
Default: 0000 0000h
Range: 0000 0000h - FFFF FFFFh
Code of warning, fault or pure event. Species an auxiliary code for
the event selected by the previous parameter. The selected event is
indicated by the event word only if its auxiliary code matches the value
of this parameter.
With a value of 0000 0000h, the event word will indicate the event
regardless of the auxiliary code.
EVENT WORD 1 BIT 9 CODE
(04.59)
Default: 0000h
Range: 0000h - FFFFh
Code of event. Selects the hexadecimal code of an event (warning,
fault or pure event) whose status is shown as bit 9 of 04.40 Event word
1. The event codes are listed in chapter Fault tracing.
EVENT WORD 1 BIT 9 AUX
CODE (04.60)
Default: 0000 0000h
Range: 0000 0000h - FFFF FFFFh
Code of warning, fault or pure event. Species an auxiliary code for
the event selected by the previous parameter. The selected event is
indicated by the event word only if its auxiliary code matches the value
of this parameter.
With a value of 0000 0000h, the event word will indicate the event
regardless of the auxiliary code.
EVENT WORD 1 BIT 10
CODE (04.61)
Default: 0000h
Range: 0000h - FFFFh
Code of event. Selects the hexadecimal code of an event (warning,
fault or pure event) whose status is shown as bit 10 of 04.40 Event
word 1. The event codes are listed in chapter Fault tracing.
EVENT WORD 1 BIT 10 AUX
CODE (04.62)
Default: 0000 0000h
Range: 0000 0000h - FFFF FFFFh
Code of warning, fault or pure event. Species an auxiliary code for
the event selected by the previous parameter. The selected event is
indicated by the event word only if its auxiliary code matches the value
of this parameter.
With a value of 0000 0000h, the event word will indicate the event
regardless of the auxiliary code.
To Next Page
Loading...
