ABB ACS880-01-061A-3+N5350 - Page 116

Startup Assistant & Parameters 12-373AXD50000011888
Table 12-4 Level 1 Parameter Block Definitions
Block Title
Parameter (Number)
Selection (Value)
Descriptions
CONTROL AND
STATUS WORDS
(Continued)
FOLLOWER CW USER BIT 0
SELECTION (06.45)
Default: MCW user bit 0 (2)
Range: 0 - 5, Other
False (0)
0
True (1)
1
MCW user bit 0 (2)
Bit 12 of 06.01 Main control word
MCW user bit 1 (3)
Bit 13 of 06.01 Main control word
MCW user bit 2 (4)
Bit 14 of 06.01 Main control word
MCW user bit 3 (5)
Bit 15 of 06.01 Main control word
Other [bit]
Source selection (see Terms and abbreviations)
Selects a binary source whose status is transmitted as bit 12 of the
Follower control word to follower drives. (Bits 0-11 of the Follower
control word are taken from 06.01 Main control word.)
See also section Master/follower functionality.
FOLLOWER CW USER BIT 1
SELECTION (06.46)
Default: MCW user bit 1 (3)
Range: 0 - 5, Other
False (0)
0
True (1)
1
MCW user bit 0 (2)
Bit 12 of 06.01 Main control word
MCW user bit 1 (3)
Bit 13 of 06.01 Main control word
MCW user bit 2 (4)
Bit 14 of 06.01 Main control word
MCW user bit 3 (5)
Bit 15 of 06.01 Main control word
Other [bit]
Source selection (see Terms and abbreviations)
Selects a binary source whose status is transmitted as bit 13 of the
Follower control word to follower drives. (Bits 0-11 of the Follower
control word are taken from 06.01 Main control word.)
FOLLOWER CW USER BIT 2
SELECTION (06.47)
Default: MCW user bit 2 (4)
Range: 0 - 5, Other
False (0)
0
True (1)
1
MCW user bit 0 (2)
Bit 12 of 06.01 Main control word
MCW user bit 1 (3)
Bit 13 of 06.01 Main control word
MCW user bit 2 (4)
Bit 14 of 06.01 Main control word
MCW user bit 3 (5)
Bit 15 of 06.01 Main control word
Other [bit]
Source selection (see Terms and abbreviations)
Selects a binary source whose status is transmitted as bit 14 of the
Follower control word to follower drives. (Bits 0-11 of the Follower
control word are taken from 06.01 Main control word.)