8-10 Keypad and Programming 3AXD50000011888
8.4.5.2 Parameters
Table 8-6
Task Actions
Choose parameters displayed on the Favorites list. Go to Menu > Parameters > Favorites > Edit.
View/edit parameters. Go to Menu > Parameters to view parameters.
Add parameters to the Home view. See assistant panel manual.
Show/hide parameter index and group numbers.
Press + .
Restore parameter default value.
In the editing mode, press + .
To save the default value, press (Save).
View parameters that differ from Application defaults. Go to Menu > Parameters > Modified.
8.4.5.3 System Information and Help
Table 8-7
Task Actions
How to get help.
Press
?
to open the context-sensitive help.
View control panel version. Go to Menu > System into > Control panel.
View drive information. Go to Menu > System into > Drive.
8.4.5.4 Faults and Warnings
See Fault tracing in Chapter 13 for detailed information on faults and warnings.
Table 8-8
Task Actions
Hide/view an active fault.
Faults are automatically displayed. If you hide a fault by
pressing (Hide), it automatically reappears after 60
seconds of no key presses. You can also view the fault through
Options > Fault status.
Open help page on a fault.
Press
to view the help page.
Reset an active fault.
Press (Reset) to reset an active fault.
View tripping faults. Go to Menu > Event log > Primary faults.
Hide/view and active warning.
Warnings are automatically displayed. If you hide a warning by
pressing (Hide), it automatically reappears if the warning is
still active after 60 seconds of no key presses.
Open help page on a warning.
Press (How to fix) or
to view the help page.
Reset an active warning.
Warnings disappear automatically once the condition that has
triggered it goes away.
View past warnings and faults. Go to Menu > Event log > Other events.
8.4.5.5 Basic Settings and Assistants
Table 8-9
Task Actions
Adjust backlight brightness.
Press + or
Adjust display contrast.
Press + or
Change language. Go to Menu > Settings > Language.
Change time and date, and related settings. Go to Menu > Settings > Date & time.
Launch an assistant. Go to Menu > Assistants and select an assistant to launch.
To Next Page
Loading...
