Startup Assistant & Parameters 12-133AXD50000011888
Table 12-2 Drive Assistant
De-Ice Selection
Select the I/O or Communication Link that will
Enable De-Ice mode
[0
]
DISABLE
[1] DI01
[2] FBA
00
:
00 SaveCancel
CTDD 0.0 rpmLocal
75.01 De-Ice Selection
[3] EFB
Backup
Copies all settings into a backup le stored in the
control panel. Press to highlight Backup and
to begin the Backup.
00:00Back
50.0 rpmLocal
Make backup?
Copies all settings into a backup file
stored in the control panel. To restore
a backup, go to Menu > Backups.
Not now
Backup
Next
CTDD
Backup Status
A status screen indicates progress.
Backing up data from drive
CTDD 0.0 rpmLocal
Press (back) to backout and exit to home menu.
00:00Back
600.0 rpmRemote
Set-up complete
I/O should be connected as follows:
Done
CTDD
Start/Stop: Digital Input DI 1
Speed reference: Analog Input AI 90-10 V
Control Signal Settings
Check the positions of jumpers J1 and J2 on the control unit of the drive. These jumpers determine whether
analog inputs AI1 and AI2 are current or voltage.
To Next Page
Loading...
