Technical data 141
Shock
IEC 60068-2-27:2008,
EN 60068-2-27:2009
Environmental testing -
Part 2-27: Tests - Test Ea
and guidance: Shock
Not allowed With packing max.
100 m/s
2
(328 ft/s
2
)
11 ms
With packing max.
100 m/s
2
(328 ft/s
2
)
11 ms
Materials
Cabinet Hot-dip zinc coated 1.5 mm thick steel sheet (thickness of coating approximately
20 micrometers). Polyester thermosetting powder coating (thickness
approximately 80 micrometers) on visible surfaces, color RAL 7035 and RAL
9017. PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1C Cool Grey).
Busbars Tin-plated copper
Fire safety of materials
(IEC 60332-1)
Insulating materials and non-metallic items mostly self-extinctive
Disposal The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and
precious metals can be recycled as material. Plastics, rubber, cardboard and
other packaging material can be used in energy recovery. Printed circuit boards
and DC capacitors (C1-1 to C1-x) need selective treatment according to
IEC 62635 guidelines. To aid recycling, plastic parts are marked with an
approppriate identification code.
Contact your local ABB distributor for further information on environmental
aspects and recycling instructions for professional recyclers. End of life
treatment must follow international and local regulations.
Parts Name
Hazard Substance
(Pb) (Hg) (Cd)
(Cr
6+
)
(PBB) (PBDE)
PCBA × ○○○○○
Metal parts ○○○○○○
Plastic parts ○○○○○○
Other Nonmetal parts ○○○○○○
Fans ○○○○○○
Cable/wires ○○○○○○
This table is made according to SJ/T 11364
○：means the content of this hazard substance in the homogeneous materials of the parts is less than
the limit requirement in GB/T 26572
×：means the content of this hazard substance in the homogeneous materials of the parts is exceed the
limit requirement of GB/T 26572
PCBA: include Printed Circuit Board and the components.
Depending on the model/type of product, it may not contain all of the above parts. It is subject to the
purchased actual product model/type.
This environmental protection period applies only when the product is used according to the
conditions required by the user manual.
To protect the environment and human health:
1. The scrapped product should be separated from domestic waste and sent to a qualified place of
disposal.
2. Recycling center should use appropriate methods to recycle/deal with the materials.
3. For more information about this product recycling, please contact local government, recycling center
or your local dealer.
To Next Page
Loading...
