22 Introduction to the manual
Electrical installation gives instructions on wiring the drive.
Control units of the drive contains the default I/O connection diagrams, descriptions of the
terminals and technical data for the control units of both the supply and inverter units.
Installation checklist contains a list for checking the mechanical and electrical installation
of the drive.
Start-up describes the start-up procedure of the drive.
Fault tracing describes the fault tracing possibilities of the drive.
Maintenance contains preventive maintenance instructions.
Technical data contains the technical specifications of the drive, eg. the ratings, sizes and
technical requirements, provisions for fulfilling the requirements for CE and other
markings.
Dimensions contains example dimension drawings of the drive.
Safe torque off function describes the Safe torque off function of the drive and gives
instructions on its implementation.
Resistor braking describes selection, protection and wiring of optional brake choppers and
resistors. The chapter also contains technical data.
Related manuals
See List of related manuals on the inside of the front cover.
Categorization by frame size and option code
Some instructions, technical data and dimension drawings which concern only certain
frame sizes are marked with the symbol of the frame size. The instructions, technical data
and dimension drawings which concern only certain drive.
Frame sizes are marked with the symbol of the frame size (R10 or R11). The frame size is
marked on the type designation label.
To Next Page
Loading...
