40 Operation principle and hardware description
Type designation label
The type designation label includes ratings, appropriate markings, a type designation and
a serial number, which allow identification of each unit. A sample label is shown below.
Quote the complete type designation and serial number when contacting technical
support.
Type designation key
The type designation contains information on the specifications and configuration of the
drive. The first digits from left express the basic configuration (eg, ACS880-07-1580A-5).
The optional selections are given thereafter, separated by plus signs, eg, +E202. The main
selections are described below. Not all selections are available for all types. For more
information, refer to ACS880 07XT Ordering Information.
No. Description
1 Type designation, see section Type designation key on page 40.
2
Manufacturing address
3 Frame size
4
Degree of protection
5 Ratings. See section Ratings on page 133, section Electrical power network specification on page
139 and section Motor connection data on page 139.
6 Short-circuit withstand strength, section Electrical power network specification on page 139.
7 Valid markings
8 Serial number. The first digit of the serial number refers to the manufacturing plant. The next four
digits refer to the unit’s manufacturing year and week, respectively. The remaining digits complete the
serial number so that there are no two units with the same number.
CODE DESCRIPTION
Basic codes
ACS880 Product series
07XT When no options are selected: cabinet-installed drive, IP22 (UL Type 1), main switch-
disconnector, aR fuses, ACS-AP-I assistant control panel, build-in input choke, no EMC filter,
common mode filter, ACS880 primary control program, Safe torque off function, coated circuit
boards, bottom entry and exit of cables with lead-through-type entries, USB memory stick
containing circuit diagrams, dimension drawings and manuals.
Size
xxxxx Refer to the rating tables (see technical data)
Voltage range
To Next Page
Loading...
