142 Technical data
Applicable standards
The drive complies with the standards below. The compliance with the European
Low Voltage Directive is verified according to standard EN 61800-5-1.
EN 61800-5-1:2007 Adjustable speed electrical power drive systems. Part 5-1: Safety requirements
– electrical, thermal and energy
EN 60204-1:2006 +A1
2009
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements. Provisions for compliance: The final assembler of the machine is
responsible for installing emergency-stop device.
IEC/EN 60529:1991 + A1
2000
Degrees of protection provided by enclosures (IP code)
EN 61800-3:2004 Adjustible speed electrical power drive systems. Part 3: EMC requirements and
specific test methods
IEC/EN 61439-1:2009 Low voltage switchgear and controlgear assemblies --Parts 1: general rules
To Next Page
Loading...
