ABB ACS880-07XT Series - Technical Data; Ratings; SAFUR Resistors

Resistor braking 165
Technical data
 Ratings
P
brcont
Maximum continuous braking power. The braking is considered continuous if the braking time
exceeds 30 seconds.
R
min
The minimum allowed resistance value of the brake resistor
R Resistance value for the listed resistor assembly
E
R
Short energy pulse that the resistor assembly withstands every 400 seconds
P
Rcont
Continuous power (heat) dissipation of the resistor when placed correctly
The ratings apply at an ambient temperature of 40 °C (104 °F). For 690 V data, please contact your local ABB
representative.
 SAFUR resistors
The degree of protection of SAFUR resistors is IP00. The resistors are not UL listed. The
thermal time constant of the resistors is 555 seconds.
Drive module
unit type
ACS880-
07XT-
Basic module
type
ACS8880-04-
Internal brake
chopper per
basic brake
module
Example brake resistor(s) per basic module
P
brcont
R
min
Type R E
R
P
Rcont
kW ohm ohm kJ kW
U
N
= 400 V
1010A-3 585A-3+P943 315 1.3 2xSAFUR200F500 1.35 10800 27
1190A-3 650A-3+P943 315 1.3 2xSAFUR200F500 1.35 10800 27
1330A-3 725A-3+P943 400 0.7 3xSAFUR200F500 0.90 16200 40
1610A-3 880A-3+P943 400 0.7 3xSAFUR200F500 0.90 16200 40
U
N
= 500 V
1010A-5 583A-5+P943 315 1.3 2xSAFUR200F500 1.35 10800 27
1160A-5 635A-5+P943 315 1.3 2xSAFUR200F500 1.35 10800 27
1310A-5 715A-5+P943 400 0.7 3xSAFUR200F500 0.90 16200 40
1610A-5 880A-5+P943 400 0.7 3xSAFUR200F500 0.90 16200 40
U
N
= 690 V
0810A-7 430A-7+P943 285 2.2 SAFUR200F500 2.70 3600 13
0960A-7 522A-7+P943 350 2.0 2xSAFUR125F500 2.0 7200 18
1080A-7 590A-7+P943 400 1.8 2xSAFUR125F500 2.0 7200 18
1320A-7 721A-7+P943 400 1.8 2xSAFUR125F500 2.0 7200 18
3AXD10000363510, 3AXD00000588487