EasyManua.ls Logo

ABB ACS880-07XT Series - Page 41

ABB ACS880-07XT Series
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation principle and hardware description 41
3 380…415 V AC. This is indicated in the type designation label as typical input voltage level
(3~ 400 V AC)
5 380…500 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 400/480/500 V AC)
7 525…690 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 525/600/690 V AC)
Option codes (plus codes)
Supply connection
A004 12-pulse supply connection
Degree of protection
B054 IP42 (UL Type 1)
B055 IP54 (UL Type 12), pending
Resistor braking
D150 Brake choppers
Filters
E200 EMC filter for second environment TN (grounded) system, category C3. Available for ACS880-
04XT-xxxx-7 types only
E201 EMC filter for second environment IT (ungrounded)) system, category C3. Available for ACS880-
04XT-xxxx-7 types only
E210 EMC filter for second environment TN (grounded) and IT (ungrounded)) systems, category C3.
Available for ACS880-04XT-xxxx-3 and -5 types only
E205 du/dt output filter
Line options
F250 Line contactor
Cabinet equipment
G300 Cabinet and module heating elements (external supply)
G307 Terminals for connecting external control voltage (230 V AC or 115 V AC, eg. UPS)
Motor cable options
H366 Common output for motor (need selecting +E205)
Fieldbus adapters
K451 FDNA-01 DeviceNet™ adapter module
K454 FPBA-01 PROFIBUS DP adapter module
K457 FCAN-01 CANopen adapter module
K458 FSCA-01 RS-485 adapter module
K462 FCNA-01 ControlNet™ adapter module
K469 FECA-01 EtherCat adapter module
K470 FEPL-02 EtherPOWERLINK adapter module
K473 FENA-11 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols
K475 FENA-21 Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port
I/O extensions and feedback interfaces
L500 FIO-11 analog I/O extension module
L501 FIO-01 digital I/O extension module
L502 FEN-31 HTL incremental encoder interface module
L504 Additional I/O terminal block
L505 Thermistor relay (1 or 2 pcs)
L506 Pt100 relay (2, 3, 5 or 8 pcs)
CODE DESCRIPTION

Table of Contents

Related product manuals