ABB ACSM1 Series - Page 104

16h
Parameter address impermissible
Illegal value or value that is not supported for
the attribute, number of elements, parameter
number or sub-index, or a combination
17h
Illegal format
Write request: Illegal format or format of
parameter data that is not supported.
18h
Number of values inconsistent
Write request: Number of values of parameter
data does not match number of elements at the
parameter address.
65h…FF
Manufacturer-specific error area
-
65h
Vendor-specific error
Vendor-specific error
66h
Request not supported
Request not supported
67h
Communication error
Request cannot be completed because of
communication error
6Eh
Non-volatile error
Failure during write to non-volatile memory
6Fh
Time-out error
Request aborted because of timeout
78h
PZD map failure
Parameter cannot be mapped to PZD (size
mismatch or non-existent)
79h
PZD memory failure
Parameter cannot be mapped to PZD (out of
memory)
7Ah
Multiple PZD map
Parameter cannot be mapped to PZD (multiple
PZD write)
82h
Control word bit map
Cannot map Control word bit (parameter
933…937. e.g. double mapping of bits)
8Ch
Set torque mode error
Cannot change mode to TORQUE (frequency
is used)
90h
Illegal Request ID
The request ID of the response is illegal
96h
Internal buffer
Buffer overflow
A0h
Internal communication
Communication error between module and
drive