ABB ACSM1 - Inquiries

About this manual
18
Inquiries
Address any inquiries about the product to the local ABB representative, quoting the
type code and the serial number of the unit. If the local ABB representative cannot
be contacted, address inquiries to the manufacturing facility.
Connect the power cables.
Connect the control and the auxiliary control cables.
Electrical installation: Power cable connection:
(page 49) and Connecting the control cables:
(page 58)
For optional equipment:
Mains chokes (page 85)
Mains filters (page 87)
Resistor braking (page 91)
Manuals for any optional equipment
Check the installation. Installation checklist (page 63)
Commission the drive. Appropriate Firmware Manual
Commission the braking chopper if required. Resistor braking (page 91)
Operating of the drive: start, stop, speed control etc. Appropriate Firmware Manual
Task See