ABB ACSM1 - Fan Replacement (Frames C and D, ACSM1-04 Ax-XXXX-X)

Maintenance
67
Fan replacement (Frames C and D, ACSM1-04Ax-xxxx-x)
To remove the fan, release the retaining clip (arrowed) carefully using a screwdriver.
Pull the fan holder out. Disconnect the fan cable. Carefully bend the clips on the fan
holder to free the fan.
Install new fan in reverse order.
Note: The airflow direction is bottom-to-top. Install the fan so that the airflow arrow
points up.
A
i
r
f
l
o
w
d
i
r
e
c
t
i
o
n