Planning the electrical installation
43
Install the protective component as close to the inductive load as possible, not at the
relay output.
Residual current device (RCD) compatibility
ACSM1-04 drives are suitable to be used with residual current devices of Type B.
Other measures for protection in case of direct or indirect contact, such as
separation from the environment by double or reinforced insulation or isolation from
the supply system by a transformer, can also be applied.
24 VDC
230 VAC
230 VAC
Relay output
Varistor
RC filter
Diode
Relay output
Relay output
To Next Page
Loading...
