ABB DriveIT ACH550-UH - Page 102

102 ACH550-UH User’s Manual
Start-Up
3205 SUPERV 2 LIM LO Depends on selection 4.6 A
Sets the low limit for the second supervised parameter. See 3204
SUPERV 2 PARAM above.
3206 SUPERV 2 LIM HI Depends on selection 4.6 A
Sets the high limit for the second supervised parameter. See 3204
SUPERV 2 PARAM above.
3207 SUPERV 3 PARAM 101…199 1 105
Selects the third supervised parameter. See 3201 SUPERV 1 PARAM above.
3208 SUPERV 3 LIM LO Depends on selection 100.0%
Sets the low limit for the third supervised parameter. See 3207
SUPERV 3 PARAM above.
3209 SUPERV 3 LIM HI Depends on selection 100.0%
Sets the high limit for the third supervised parameter. See 3207 SUPERV 3 PARAM above.
Group 32: Supervision
Code Description Range Resolution Default S