ACH550-UH User’s Manual 29
Start-Up
Changed Parameters Mode
To view changed parameters, follow these steps:
Drive Parameter Backup Mode
Use the parameter backup mode to export parameters from one drive to another.
The parameters are uploaded from a drive to the control panel and downloaded from
the control panel to another drive. Two options are available:
• Download all – copies all application and motor parameters to the drive. Useful
where drives of the same size use the same application. Also useful to create a
backup for recovery if drive parameters are corrupted or erased.
Panel Display Prompts for display variable and unit settings.
Timed Functions Prompts for the use of Timed functions.
Output • Prompts for the signals indicated through the relay outputs.
• Prompts for signals indicated through the analog outputs AO1 and AO2.
Sets the minimum, maximum, scaling and inversion values.
1
Select MENU to enter the menu.
2
Select CHANGED PAR with the UP/
DOWN buttons and select ENTER.
3
A list of changed parameters is displayed.
Select EXIT to exit the parameters mode.
Task name Description
Control
Download
all
X0202
Upload
to panel
IP2100
Panel
IP2100
To Next Page
Loading...
