ACH550-UH User’s Manual 103
Start-Up
Group 33: Information
This group provides access to information about the drive’s current programs: versions and test date.
Group 33: Information
Code Description Range Resolution Default S
3301 FW VERSION 0000…FFFF hex 1 Firmware ver.
Contains the version of the drive’s firmware.
3302 LP VERSION 0000…FFFF hex 1 0
Contains the version of the loading package.
3303 TEST DATE yy.ww 1 0
Contains the test date (yy.ww).
3304 DRIVE RATING - - -
Indicates the drive’s current and voltage rating. The format is XXXY, where:
• XXX =The nominal current rating of the drive in amps. If present, an “A” indicates a decimal point in the rating for
the current. For example XXX = 8A8 indicates a nominal current rating of 8.8 Amps.
• Y = The voltage rating of the drive, where Y = 2 indicates a 208…240 Volt rating, and Y = 4 indicates a 380…480
Volt rating.
To Next Page
Loading...
