EasyManua.ls Logo

ABB DriveIT ACH550-UH - Page 136

ABB DriveIT ACH550-UH
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
136 ACH550-UH User’s Manual
Start-Up
Wire each Interlock circuit as follows:
Wire a contact of the motor’s On/Off switch to the Interlock circuit – the drive’s PFA logic can then recognize that
the motor is switched off, and start the next available motor.
Wire a contact of the motor thermal relay (or other protective device in the motor circuit) to the Interlock input – the
drive’s PFA logic can then recognize that a motor fault is activated and stop the motor.
0 =
NOT SEL – Disables the Interlock function. All digital inputs are available for other purposes.
Requires 8118
AUTOCHNG INTERV = 0 (The Autochange function must be disabled if Interlock function is
disabled.)
1 = DI1 – Enables the Interlock function, and assigns a digital input (starting with DI1) to the interlock signal for each
PFA relay. These assignments are defined in the following table and depend on:
The number of PFA relays (number of parameters 1401…1403 and 1410…1412) with value = 31 (
PFA).
The Autochange function status (disabled if 8118
AUTOCHNG INTERV = 0, and otherwise enabled).
Group 81: PFA
Code Description Range Resolution Default S
No. PFA
Relays
Autochange Disabled
(P 8118)
Autochange Enabled
(P 8118)
0
DI1: Speed Reg Motor
DI2…DI6: Free
Not allowed
1
DI1: Speed Reg Motor
DI2: First PFA Relay
DI3…DI6: Free
DI1: First PFA Relay
DI2…DI6: Free
2
DI1: Speed Reg Motor
DI2: First PFA Relay
DI3: Second PFA Relay
DI4…DI6: Free
DI1: First PFA Relay
DI2: Second PFA Relay
DI3…DI6: Free
3
DI1: Speed Reg Motor
DI2: First PFA Relay
DI3: Second PFA Relay
DI4: Third PFA Relay
DI5…DI6: Free
DI1: First PFA Relay
DI2: Second PFA Relay
DI3: Third PFA Relay
DI4…DI6: Free
4
DI1: Speed Reg Motor
DI2: First PFA Relay
DI3: Second PFA Relay
DI4: Third PFA Relay
DI5: Fourth PFA Relay
DI6: Free
DI1: First PFA Relay
DI2: Second PFA Relay
DI3: Third PFA Relay
DI4: Fourth PFA Relay
DI5…DI6: Free
5
DI1: Speed Reg Motor
DI2: First PFA Relay
DI3: Second PFA Relay
DI4: Third PFA Relay
DI5: Fourth PFA Relay
DI6: Fifth PFA Relay
DI1: First PFA Relay
DI2: Second PFA Relay
DI3: Third PFA Relay
DI4: Fourth PFA Relay
DI5: Fifth PFA Relay
DI6: Free
6 Not allowed
DI1: First PFA Relay
DI2: Second PFA Relay
DI3: Third PFA Relay
DI4: Fourth PFA Relay
DI5: Fifth PFA Relay
DI6: Sixth PFA Relay

Table of Contents

Related product manuals