ABB EC Titanium Series - Page 13

General Information and Ratings 2-3MN448
2.2.3 Drive Nameplate and Type Designation Label
For Axial and Top Mounted integrated drive and motor units, two drive labels are included to allow identication for IEC and
NEMA ratings. The drive type designation label is located on the side of the drive module under the cover. A second Drive
Label is located on the outside of the drive enclosure.
Figure 2-3 Enclosure Drive Label
ECI4A4P1
280-480V 48...62
4.5 A5.6 A
62340001007
3
Figure 2-4 Interior Drive Module Label
PN 1.5kW ( 2HP)
U1 3 ~ 280-480V
I1 5.6 A
I1
with ext. choke 4.5A
f1 48...62Hz
U2 3 ~ 0-500 V
I2 4.2 A (150% 1/5 min)
F2 0-500Hz
IP20 /
UL Open type
ECI4A4P1
910161
Power down for
5 mins before
removing
cover
AC Variable Speed Motors
ABB Motor and Mechanical Inc.
Fort Smtih, AR
Caution
12
3
4
5
6
Read User
guide before
installation
or servicing
Region Description
1 Drive Module, see ratings table
on page xxx
2 Degree of protection by
enclosure (IP and UL/NEMA)
3 Nominal ratings, see ratings
table on page xxx
4 ABB MRP code of the drive
5 Drive Date Code*
6 CE marking
*Note: Drive 6 Digit date code, read backwards for example, the number 910161 means 16 January 2019
2.2.4 Motor and Drive Nameplate Locations
Region Description
1
2
3
1 Figure 2.2 Motor Nameplate
2 Figure 2.3 Drive Enclosure
Nameplate
3 Figure 2.4 Drive Module
Nameplate (see Section 3.5
removing drive cover)