EtherNet/IP – Communication protocol 219
Device Type
The list of device types is managed by ODVA. It is used to identify
the device profile that a particular product is using.
Product Code
Every ABB drive type or application of the drive has a dedicated
product code. The product code is 100 + the value of parameter 29
DRIVE TYPE CODE.
Revision
Revision attribute, which consists of Major and Minor Revisions,
identifies the revision of the item the identity object represents.
Status
This attribute represents the current status of the entire device. Its
value changes as the state of the device changes. The Status
attribute is a WORD, with the following bit definitions:
Drive Type Profile Device Type Value
AC ODVA AC/DC Drive ODVA AC Drive 02h
ABB Drives Profile ABB AC Drive 64h
Transparent 16 ABB AC Drive 64h
Transparent 32 ABB AC Drive 64h
DC ODVA AC/DC Drive ODVA DC Drive 13h
ABB Drives Profile ABB DC Drive 65h
Transparent 16 ABB DC Drive 65h
Transparent 32 ABB DC Drive 65h
Bit(s) Type/Name Definition
0 Owned TRUE indicates the device (or an object
within the device) has an owner. Within the
Master/Slave paradigm the setting of this bit
means that the Predefined Master/Slave
Connection Set has been allocated to a
master. Outside the Master/Slave paradigm
the meaning of this bit is to be defined.
1 Reserved, set to 0
To Next Page
Loading...
