ABB GoFa CRB 15000 - Safety; 01 Emergency stop button

—
03 Manipulator
Connect the cable to the
manipulator, and rotate the
cable plug to tighten it.
Rotate the socket to a
suitable position
afterwards
Cable article number:
3HAC073212-00
(connected to X1)
—
Safety
—
01 Emergency stop button
Press the emergency stop
button on the FlexPendant
immediately if a person is at
risk in the working area of
the cobot, or if the cobot
causes harm to the
equipment.
IMPORTANT- Emergency
stop button should not be
used for stopping the robot
in normal use, as this can
cause excessive wear on the
brakes.
You need to know this before switching on the robot
08 Step 2 | Hardware set up