ABB GoFa CRB 15000 - Mounting the cobot; 01 Lift the manipulator; 02 Transport the manipulator

In case you want to
transport the cobot in the
future, you can reuse the
packaging box and adjust
the robot back to the
shipping position:
—
Mounting the cobot
Example: Table mounting
—
01 Lift the manipulator
IMPORTANT - When lifting
the cobot from the
packaging, grasp the cobot
at the foot and elbow, as
shown in the image.
—
02 Transport the manipulator
Make sure the intended
mounting platform or
foundation is stable and
flat.
Axis 1 0° 0°Axis 2
+85°Axis 3 0°Axis 4
0°Axis 5 0°Axis 6
05Step 2 | Hardware set up