ABB IRB 120 - Installation

1.3 Installation
General
IRB 120 is adapted for normal industrial environment. An end effector, weighing a
maximum of 3 kg, including payload, can be mounted on the robot’s mounting
flange (axis 6). Other equipment, weighing a maximum of 0.3 kg, can be mounted
on the upper arm. For more information about mounting of extra equipment, see
Figure on next page.
Continues on next page
Product specification - IRB 120 15
3HAC035960-001 Revision: T
© Copyright 2010-2019 ABB. All rights reserved.
1 Description
1.3 Installation