4 Repair
4.3.1. Replacement of cable harness
3HAC026660-001 Revision: C118
© Copyright 2006-2008 ABB. All rights reserved.
Illustration, cabling inside base
The figure below shows how the cabling is run inside the base. Optional cabling is also shown
in the figure, but not further specified.
xx0500001388
A Power cabling
B Signal cabling
C Clamp with hexagon nut
D Attachment screws, cable clamp unit
E Hexagon nut, SMB plate
F Fastening plate
G SMB unit
H Cable clamp unit
Continued
Continues on next page
To Next Page
Loading...
