Required equipment
NoteSpare part numberEquipment
Labels are sold separately.For spare part number of a
specific label see Spare part
lists on page 233.
Labels
Inspecting labels
Use this procedure to inspect the labels on the robot.
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot work-
ing area.
1
See the figure in Location of information
labels on page 88.
Check all labels.2
Replace any missing or damaged labels.3
Product manual - IRB 2400 89
3HAC022031-001 Revision: P
© Copyright 2004-2018 ABB. All rights reserved.
3 Maintenance
3.3.1 Inspecting information labels
Continued
To Next Page
Loading...
