Menu: Device Setup (continued)
Menu/Parameter Value Range Description
Upper Range • Non linearized
• Linearized
Interface Offset
Device Setup/Device Variables/Distance-Ullage
Lower Range
Upper Range
Ullage Ref. Point
Device Setup/Device Variables/Temperature C, F Defines unit of measure for temperature
Lower Range
Upper Range
Temperature Offset
Lower Temp Limit
Upper Temp Limit
Device Setup/Device Variables/Volume Level
Lower Range
Upper Range
Device Setup/Device Variables/Volume Interface
Lower Range
Upper Range
Device Setup/Device Variables/Flow
Lower Range
Upper Range
Device Setup/Linearization/Setup
Table State Enabled, Disabled
Input Units mm, cm, m, in, ft
Output Type Level, Volume, Flow
Output Units • Unit length
- mm, cm, m, in, ft
• Unit volume
- Liters, Cubic meters, cubic inches, cubic
feet, cubic yards, gallons, Imperial gallons,
bushels, barrels, liquid barrels
• Unit flow
- Liters/second, liters/minute, liters/hour,
gallons/second, gallons/minute, gallons/
hour, gallons/day, imperial gallons/second,
imperial gallons/minute, imperial gallons/
hour, imperial gallons/day, barrels/second,
barrels/minutes, barrels/ hour, barrels/day,
cubic meters/second, cubic meters/
minute, cubic meters/hour, cubic meters/
day, cubic feet/second, cubic feet/minute,
cubic feet/hour, cubic feet/day
To Next Page
Loading...
Need help?
General
