ABB LMT Series User Manual

LMT100 AND LMT200 | MAGNETOSTRICTIVE LEVEL TRANSMITTERS | FF OI/LMT100/200/FF-EN REV. A
45
STEP 5:
Press
to edit the output value of the point
Repeat Step 2-5 to enable and assign input and output values
for other points.
IMPORTANT (NOTE)
At least 2 points must be used, but 2 points will be the same as
standard calibration unless the Output Type is set to Volume or
Flow.

ABB LMT Series Specifications

General

Brand	ABB
Model	LMT Series
Category	Transmitter
Language	English