Menu: Device Info (continued)
Menu/Parameter Value Range Description
Device Info/Serial Number
Serial Number Indicates specific device identification number
Device Info/Device Configuration
Device Configuration
Defines the application use of the device, users
can change the measurement from single level to
two levels. However, if the device is not equipped
with an RTD, then the temperature option will not
be available.
Device Info/Mount Orientation
Mount Orientation Top, Bottom Default: Top Physical mounting position of housing to probe.
Device Info/Sensor
Sensor ID
Type Magnetostrictive Device technology
Probe Length
SW Version xx.xx.xx
HW Version xx.xx.xx
FPGA Version xx.xx.xx
Sensor Low Limit
Sensor High Limit
Sensor Offset
Device Info/Electronics
SW Version xx.xx.xx
HW Version xx.xx.xx
Device Info/Display
SW Version xx.xx.xx
HW Version xx.xx.xx
To Next Page
Loading...
Need help?
General
