Calibrating the robot and the additional axes
Positioners of the types A, L and MTC
3HEA 802352-001 Rev. A 13
4. Tap on the mechanical unit to be calibra-
ted.
When the unit concerned is not visible in
the window, use the scroll bar arrows, in
the lower part of the window.
5. Tap Calibration Parameters.
6. Tap Fine Calibration.
7. The system awaits a response:
• Tap Yes to proceed.
8. Select one or more axes, to be recalibra-
ted.
9. Tap Calibrate.
Action Info/Illustration
4)
5)
6)
7)
8)
9)
To Next Page
Loading...
