Safety instructions
3HEA 802352-001 Rev. A 3
1 Safety instructions
A robot is heavy and extremely powerful regardless of its speed. A stoppage or
longer stop can be followed by rapid, dangerous movements. Even if the robot's
pattern of movement is predetermined, an external signal can affect the movement
sequence, resulting in unanticipated movement.
It is therefore important that all safety instructions are observed when entering a
safety supervised area.
1.1 Description
Safety instructions can be found under tab 1 in the AW system manual for all steps
that involve risk for personal injury or material damage. In addition, they are
included in the instructions for each step.
General warnings, where the intention is to avoid problems, are only included in the
pertinent instructions.
Reference document
All personnel working with the welding robot system must have full understanding of the
applicable safety instructions.
Document Described in:
Related safety instructions.
AW System manual, chapter introduction and safety
To Next Page
Loading...
Need help?
General
