PGC5007
PGC5007 Operating Instructions 4 Maintenance information
12 OI/PGC5007-EN, Rev C
4.2 PGC5007 troubleshooting guide
This subsection provides troubleshooting information by category. Use the listing below to determine the desired
troubleshooting category and its location in the manual.
Description Page
Cyclic Short Term Drift 13
Continuous Upward or Downward Drift 13
Baseline Continuous Noise 13
Signal Offset (FPD) 14
Signal Random Baseline Noise (FPD) 14
No Peaks 15
Double Sampling 15
Mystery Peaks 15
Variable Sample Size 16
Variable Retention Times 16
Individual Peak Missing on Report 16
Chromatogram Oversize or Off Scale 17
Reduced Detector Sensitivity 17
Peak Discrimination 17
Temperature Probe Open 18
Temperature Probe Shorted 18
Isothermal Oven Heater Thermocouple Faulty 18
Loss of Oven Air 18
Open or Shorted Heater 19
Low Oven Temperature 19
High Oven Temperature 19
Trend Output Not Functioning Correctly 19
No Analyzer Keypad Response 20
Flame Out LED On 20
Flame Will Not Ignite 20
Low Carrier Pressure Hardware Alarm 21
Loss of Purge Air 21
Stream Not Selected 21
Analyzer Will Not Power Up (X-Purge) 22
Short Quartz Tube Life 22
Repeated Column Failures 22
To Next Page
Loading...
