OI/PGC5007‐EN,revC
2
The Company
We are an established world force in the design and manufacture of measurement products for industrial process control, flow
measurement, gas and liquid analysis and environmental applications. As a part of ABB, a world leader in process automation
technology, we offer customers application expertise, service and support worldwide. We are committed to teamwork, high quality
manufacturing, advanced technology and unrivalled service and support. The quality, accuracy and performance of the Company’s
products result from over 100 years of experience, combined with a continuous program of innovative design and development to
incorporate the latest technology.
Cyber Security Disclaimer
This product is designed to be connected to and to communicate information and data via a network interface. It is the Customer's
sole responsibility to provide and continuously ensure a secure connection between the product and Customer network or any other
network (as the case may be). Customer shall establish and maintain any appropriate measures (such as but not limited to the
installation of firewalls, application of authentication measures, encryption of data, installation of anti-virus programs, etc.) to protect
the product, the network, its system and the interface against any kind of security breaches, unauthorized access, interference,
intrusion, leakage and/or theft of data or information. ABB Inc. and its affiliates are not liable for damages and/or losses related to
such security breaches, any unauthorized access, interference, intrusion, leakage and/or theft of data or information.
Information for Users regarding the EU Directive 2012/19/EU
on Waste Electrical and Electronic Equipment (WEEE)
ABB Industrial Automation, Measurement and Analytics, product manufacturing unit located at 3567 Jefferson Street North in
Lewisburg WV 24901 USA, is committed to actively protecting the environment. The following product information is provided to the
user regarding instruction to not dispose of WEEE as unsorted municipal waste but rather to collect WEEE separately. The user’s
role in the management of WEEE is indispensable for the success of WEEE collection.
Such information necessitates the proper marking of Electrical and Electronic Equipment (EEE), referred to herein
as the product, which could end up in rubbish bins or similar means of municipal waste collection. The product
displays the crossed-out wheeled bin symbol, indicating a separate collection for the EEE and that the product
conforms to the directive for Waste of Electrical and Electronic Equipment (WEEE). End of life disposal of the
product is not intended for general household waste. Disposing of this product correctly will help save valuable
resources and prevent any potential negative effects on human health and the environment.
Regarding our sustainability strategy, the course of action when developing new products is to ensure wherever possible that any
and all national and international legal requirements, directives and standards of environmental protection and occupational safety
are complied with, even if the regulatory requirement does not apply to the respective product. Our products are designed to ensure
that with proper use of the product, there are no health hazards for the user nor any risk to the environment according to present
knowledge.
Our products are manufactured from commercial materials in terms of environmental quality in such a way to ensure that during
manufacture and use, the production of waste is reduced to a minimum. The environmentally friendly recovery and disposal of
waste created after their use is guaranteed, and measured through the sustainability group of ABB.
Information for treatment facilities shall be provided by ABB regarding the preparation for re-use and treatment of new EEE placed
for the first time on the European Union market. Such information may identify the different EEE components and materials, as well
as the location of dangerous substances and mixtures. This information shall be made available by ABB to centers which prepare
for re-use and treatment, and recycling facilities listed on the ABB website. Further information may be obtained through the local
business unit of ABB.
This document shall serve for informational purposes only, no legal obligations are substantiated by any regulations.
To Next Page
Loading...
