81
A051461
Fig. 19.1.-1 Attempt to resetting the fault recorder in the wrong mode
Select the quantity to reset with UP and DOWN and press ENTER
to execute.
A051462
Fig. 19.1.-2 Resetting a quantity in the proper mode
The quantities that can be reset are:
Reset alarm: can only be reset, if there is no active alarm present anymore. An
attempt to reset an alarm caused for example by an interrupted open coil is
impossible as long as the coil is not replaced.
1MRS755869
Multifunction Protection and Switchgear Control
Unit
Operator's manual
REF542plus
To Next Page
Loading...
