ABB REG670 - Section 10 Diagnose IED status; 10.1 Read internal events; 10.2 Find available functions

IEC 61850 or function
name
ANSI Function description Generator
REG670
(Customized)
REG670 (A20) REG670 (B30)
REG670 (C30)
GOOSEINTRCV GOOSE function block to receive an
integer value
32 32 32 32
GOOSEMVRCV GOOSE function block to receive a
measurand value
60 60 60 60
GOOSESPRCV GOOSE function block to receive a
single point value
64 64 64 64
MULTICMDRCV,
MULTICMDSND
Multiple command and transmit 60/10 60/10 60/10 60/10
OPTICAL103 IEC 60870-5-103 Optical serial
communication
1 1 1 1
RS485103 IEC 60870-5-103 serial
communication for RS485
1 1 1 1
AGSAL Generic security application
component
1 1 1 1
LD0LLN0 IEC 61850 LD0 LLN0 1 1 1 1
SYSLLN0 IEC 61850 SYS LLN0 1 1 1 1
LPHD Physical device information 1 1 1 1
PCMACCS IED configuration protocol 1 1 1 1
SECALARM Component for mapping security
events on protocols such as DNP3
and IEC103
1
1 1 1
FSTACCS Field service tool access 1 1 1 1
IEC 61850-9-2 Process bus
communication, 8 merging units
0-1 1-P30 1-P30 1-P30
ACTIVLOG Activity logging 1 1 1 1
ALTRK Service tracking 1 1 1 1
PRP IEC 62439-3 Parallel redundancy
protocol
0-1 1-P23 1-P23 1-P23
HSR IEC 62439-3 High-availability
seamless redundancy
0-1 1-P24 1-P24 1-P24
PMUCONF,
PMUREPORT,
PHASORREPORT1,
ANALOGREPORT1
BINARYREPORT1,
SMAI1 - SMAI12
3PHSUM
PMUSTATUS
Synchrophasor report, 16 phasors
(see Table 7)
0-1 1-P34 1-P34 1-P34
PTP Precision time protocol 1 1 1 1
FRONTSTATUS Access point diagnostic for front
Ethernet port
1 1 1 1
SCHLCCH Access point diagnostic for non-
redundant Ethernet port
6 6 6 6
Table continues on next page
1MRK 502 071-UEN - Section 2
Application
Generator protection REG670 2.2 IEC and Injection equipment REX060, REX061, REX062 53
Application manual