ABB Relion 615 series - Replacing a Strömberg SP_J6 Series Relay by a 615 Series IED

1
2
3
GUID-90BDC1BA-F671-4178-8136-8E8D9E56A7A3 V1 EN
Figure 30: Installation plates for replacing SP_J3/J6 relay in 19" rack
1 Installation plate
2 Torx head screw M6x20
3 Hexagon nut M6
2. Tighten the screws.
3. Mount the new IED with the mounting frame to the installation plate.
For ordering numbers, see the ordering number table.
4.3.13 Replacing a Strömberg SP_J6 series relay by a 615 series
IED
1.
Drill new screw holes (∅4.5 mm) to the panel according to the dimensional
drawing.
1MRS756375 K Section 4
Mounting
615 series 43
Installation Manual