and all other typically required generator protection functions. In figure 9, this
configuration is shown.
REG670 B30 functional library includes additional functions, which are not
configured, such as additional Multipurpose protection functions, Synchrocheck
function, second generator differential protection function, and so on. It is as well
possible to order optional two- or three-winding transformer dif
ferential protection
function, which than can be used as transformer or block (that is overall) differential
protection. Note that REG670 B30 must be re-configured if any additional or optional
functions are used.
1MRK 502 071-UUS A Section 3
Configuration
Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062 63
Application manual
To Next Page
Loading...
