REB 207 Private range
REG 150 Private range
REQ 245 Private range
RER 152 Private range
RES 118 Private range
Refer to the tables in the T
echnical reference manual /Station communication,
specifying the information types supported by the communication protocol IEC
60870-5-103.
To support the information, corresponding functions must be included in the protection
IED.
There is no representation for the following parts:
• Generating events for test mode
• Cause of transmission: Info no 11, Local operation
Glass or plastic fibre should be used. BFOC/2.5 is the recommended interface to use
(BFOC/2.5 is the same as ST connectors). ST connectors are used with the optical
power as specified in standard.
For more information, refer to IEC standard IEC 60870-5-103.
20.6 DNP3 Communication protocol
20.6.1 Application
GUID-EF1F0C38-9FF6-4683-8B10-AAA372D42185 v1
For more information on the application and setting guidelines for the DNP3
communication protocol refer to the DNP3 Communication protocol manual.
Section 20 1MRK 502 071-UUS A
Station communication
760 Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062
Application manual
To Next Page
Loading...
