3.1.1.3 Description of configuration C30
SEMOD175637-18 v6
REG670 C30 configuration is used in applications where generator-transformer block
protection within one IED is required. REG670 C30 is always delivered in 1/1 of 19"
case size. Thus 24 analog inputs are available. This configuration includes generator
low impedance, dif
ferential protection, transformer differential protection and overall
differential protection functions. Note that Pole Slip protection function is optional.
See figure
10, example of one possible application.
REG670 C30 functional library includes additional functions, which are not
configured, such as additional Multipurpose protection functions, Synchrocheck
function, second generator differential protection function, and so on. Note that
REG670 C30 must be re-configured if any additional or optional functions are used.
1MRK 502 071-UUS A Section 3
Configuration
Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062 65
Application manual
To Next Page
Loading...
