ABB Relion 670 series - Page 1123

18.4.5.3 Signals
SEMOD55830-1 v2
PID-3780-INPUTSIGNALS v5
Table 812: SPGAPC Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of function
IN BOOLEAN 0 Input status
PID-3781-INPUTSIGNALS v5
Table 813: SP16GAPC Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of function
IN1 BOOLEAN 0 Input 1 status
IN2 BOOLEAN 0 Input 2 status
IN3 BOOLEAN 0 Input 3 status
IN4 BOOLEAN 0 Input 4 status
IN5 BOOLEAN 0 Input 5 status
IN6 BOOLEAN 0 Input 6 status
IN7 BOOLEAN 0 Input 7 status
IN8 BOOLEAN 0 Input 8 status
IN9 BOOLEAN 0 Input 9 status
IN10 BOOLEAN 0 Input 10 status
IN11 BOOLEAN 0 Input 11 status
IN12 BOOLEAN 0 Input 12 status
IN13 BOOLEAN 0 Input 13 status
IN14 BOOLEAN 0 Input 14 status
IN15 BOOLEAN 0 Input 15 status
IN16 BOOLEAN 0 Input 16 status
18.4.5.4 Settings
ABBD8E283673 v3
The function does not have any parameters available in the local HMI or PCM600.
18.4.5.5 Monitored data
PID-3780-MONITOREDDATA v3
Table 814: SPGAPC Monitored data
Name
Type Values (Range) Unit Description
OUT GROUP
SIGNAL
- - Output status
1MRK 502 066-UUS B Section 18
Station communication
1117
Technical manual