ABB Relion 670 series - Page 1176

18.8.7.3 Function block
GUID-421D5C37-27A5-476A-A7D9-40E70AFDFDC8 v1
I103IED
BLOCK
19_LEDRS
21_TESTM
22_SETCH
23_GRP1
24_GRP2
25_GRP3
26_GRP4
IEC10000292-2-en.vsd
IEC10000292 V2 EN-US
Figure 599: I103IED function block
18.8.7.4 Signals
PID-3975-INPUTSIGNALS v4
Table 870: I103IED Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of status reporting
19_LEDRS BOOLEAN 0 Information number 19, reset LEDs
21_TESTM BOOLEAN 0 Information number 21, test mode is active
22_SETCH BOOLEAN 0 Information number 22, setting changed
23_GRP1 BOOLEAN 0 Information number 23, setting group 1 is active
24_GRP2 BOOLEAN 0 Information number 24, setting group 2 is active
25_GRP3 BOOLEAN 0 Information number 25, setting group 3 is active
26_GRP4 BOOLEAN 0 Information number 26, setting group 4 is active
18.8.7.5 Settings
PID-3975-SETTINGS v4
Table 871: I103IED Non group settings (basic)
Name Values (Range) Unit Step Default Description
FunctionType 1 - 255 - 1 1 Function type (1-255)
18.8.8 Supervison status for IEC 60870-5-103 I103SUPERV
18.8.8.1 Functionality
GUID-E7A28D8D-398E-437C-9B58-AE125BC38058 v1
I103SUPERV is a function block with defined functions for supervision indications in monitor
direction. This block includes the
FunctionType parameter, and the information number parameter
is defined for each output signal.
Section 18 1MRK 502 066-UUS B
Station communication
1170
Technical manual