ABB Relion 670 series - Page 1178

18.8.9 Status for user defined signals for IEC 60870-5-103 I103USRDEF
18.8.9.1 Functionality
GUID-DADC9CE4-2E80-426C-A3B6-A8E8C7AC3CD4 v3
I103USRDEF is a function block with user defined input signals in monitor direction. Each instance
is associated with a Function Type (FUN) and each input signal with an Information Number (INF).
Additionally, all input signals may be defined to use relative time and how to respond to a GI
request.
The user is responsible for assigning a proper FUN value and proper INF values to all connected
inputs. See Settings for details.
18.8.9.2 Identification
GUID-474FDF39-CEFC-4370-9393-13BE62159969 v2
Function description Function block
name
IEC 60617
identification
ANSI/IEEE C37.2
device number
Status for user defined signals for
IEC 60870-5-103
I103USRDEF - -
18.8.9.3 Function block
GUID-B8312E77-514D-4117-BB31-B9907755580C v1
IEC10000294 V2 EN-US
Figure 601: I103USRDEF function block
18.8.9.4 Signals
PID-6485-INPUTSIGNALS v4
Table 874: I103USRDEF Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of status reporting
INPUT1 BOOLEAN 0 Binary signal Input 1
INPUT2 BOOLEAN 0 Binary signal input 2
INPUT3 BOOLEAN 0 Binary signal input 3
INPUT4 BOOLEAN 0 Binary signal input 4
INPUT5 BOOLEAN 0 Binary signal input 5
INPUT6 BOOLEAN 0 Binary signal input 6
Table continues on next page
Section 18 1MRK 502 066-UUS B
Station communication
1172
Technical manual