Measuring functions for S, P, Q, I, U, PF, f are available for local presentation on the
local HMI and/or remote presentation.
The following should be noted. The configuration is made with the binary input and
binary output boards in the basic IED delivery, and one 9I + 3U input transformer
module. It is possible to add IO as required to, for example have neutral currents
connected to
ground fault functions. The configuration alternative can often be used for
two winding transformers and the neutral currents can then be connected instead of the
third winding inputs.
Section 3 1MRK 504 163-UUS A
Configuration
60 Transformer protection RET670 2.2 ANSI
Application manual
To Next Page
Loading...
