ABB SACE Emax 2 Series - Ekip Touch - Default; 1 - Ekip TOUCH default parameters

ABB | SACE Emax 2
Ekip Touch - Additional functions
4 - Load Shedding
144 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
Ekip Touch Measure
A specific page containing the main measurements is available in the Measurements pages, with Power
Controller
activated:
Measurement Description
F Frequency measured
Fn Nominal frequency of the Trip unit
LOADS Number of loads monitored
LOADS Shed Number of shed loads
The
Load Shedding menu, with information concerning the 15 loads in two submenus, is available in the
About page when Load Shedding is activated (page 50).
Submenus Information provided
Load Input Status Status of the loads (from Load 1 to Load 15): open or closed
Load Active Load configuration (from Load 1 to Load 15): active or inactive